Select the filaments you want to compare
Selected:
PLA
Shop now
PETG
Shop now
ABS
Shop now
ABS-GF
Shop now
ASA
Shop now
PC
Shop now
TPU 95A HF
Shop now
PLA-CF
Shop now
PETG-CF
Shop now
PET-CF
Shop now
PAHT-CF
Shop now
PA6-CF
Shop now
PA6-GF
Shop now
Filament Properties
Toughness
Impact Strength - XY
26.6 kJ/m²
52.7 kJ/m²
39.3 kJ/m²
14.5 kJ/m²
41.0 kJ/m²
34.8 kJ/m²
123.2 kJ/m²
23.2 kJ/m²
41.2 kJ/m²
36.0 kJ/m²
57.5 kJ/m²
40.3 kJ/m²
27.2 kJ/m²
Strength
Bending Strength - XY
76 MPa
65 MPa
62 MPa
68 MPa
65 MPa
108 MPa
N/A
89 MPa
70 MPa
131 MPa
125 MPa
151 MPa
120 MPa
Stiffness
Bending Modulus - XY
2750 MPa
1670 MPa
1880 MPa
2860 MPa
1920 MPa
2310 MPa
N/A
3950 MPa
2910 MPa
5320 MPa
4230 MPa
5460 MPa
3670 MPa
Layer Adhesion
Impact Strength - Z
13.8 kJ/m²
13.6 kJ/m²
7.4 kJ/m²
5.3 kJ/m²
4.9 kJ/m²
9.0 kJ/m²
86.3 kJ/m²
7.8 kJ/m²
10.7 kJ/m²
4.5 kJ/m²
13.3 kJ/m²
15.5 kJ/m²
4.1 kJ/m²
Heat Resistance
HDT, 0.45 MPa
57 ℃69 ℃87 ℃99 ℃100 ℃117 ℃N/A55 °C74 °C205 °C194 °C186 ℃182 ℃
Saturated Water Absorption Rate
25 ℃, 55% RH
0.43%0.32%0.65%0.53%0.45%0.25%1.08%0.42%0.30%0.37%0.88%2.35%2.56%
Pre-printing Preparation
Dry Out Before Use
OptionalOptionalOptionalOptionalOptionalRequiredRequiredOptionalOptionalRequiredRequiredRequiredRequired
Drying Condition
Blast Drying Oven: 55 °C, 8 h X1 Series Heatbed: 65 - 75 °C, 12 hBlast Drying Oven: 65 °C, 8 h X1 Series Heatbed: 75 - 85 °C, 12 hBlast Drying Oven: 80 °C, 8 h X1 Series Heatbed: 90 - 100 °C, 12 hBlast Drying Oven: 80 °C, 8 h X1 Series Heatbed: 90 - 100 °C, 13 hBlast Drying Oven: 80 °C, 8 h X1 Series Heatbed: 90 - 100 °C, 12 hBlast Drying Oven: 80 °C, 8 h X1 Series Heatbed: 90 - 100 °C, 12 hBlast Drying Oven: 70 °C, 8 h X1 Series Heatbed: 80 - 90 °C, 12 hBlast Drying Oven: 55 °C, 8 h X1 Series Heatbed: 65 - 75 °C, 12 hBlast Drying Oven: 65 °C, 8 h X1 Series Heatbed: 75 - 85 °C, 12 hBlast Drying Oven: 80 °C, 8 - 12 h X1 Series Heatbed: 90 - 100 °C, 12 hBlast Drying Oven: 80 °C, 8 - 12 h X1 Series Heatbed: 90 - 100 °C, 12 hBlast Drying Oven: 80 °C, 8 - 12 h X1 Series Heatbed: 90 - 100 °C, 12 hBlast Drying Oven: 80 °C, 8 - 12 h X1 Series Heatbed: 90 - 100 °C, 12 h
AMS Compatibility
Nozzle Size/Material
All Size/MaterialAll Size/MaterialAll Size/Material0.6 mm (recommended) / 0.4 mm / 0.8 mm Hardened SteelAll Size/MaterialAll Size/Material0.4 mm / 0.6 mm / 0.8 mm Hardened Steel / Stainless steel0.4 mm / 0.6 mm / 0.8 mm Hardened Steel0.4 mm / 0.6 mm / 0.8 mm Hardened Steel0.6 mm (recommended) / 0.4 mm / 0.8 mm Hardened Steel0.6 mm (recommended) / 0.4 mm / 0.8 mm Hardened Steel0.6 mm (recommended) / 0.4 mm / 0.8 mm Hardened Steel0.6 mm (recommended) / 0.4 mm / 0.8 mm Hardened Steel
Build Plate & Bed Temperature
Cool Plate(35-55 °C) High Temperature Plate(55-65 °C) Textured PEI Plate(55-65 °C)Engineering Plate(60-80 °C) High Temperature Plate(60-80 °C) Textured PEI Plate(60-80 °C)Engineering Plate(90-100 °C) High Temperature Plate(90-100 °C) Textured PEI Plate(90-100 °C)Engineering Plate(90-100 °C) High Temperature Plate(90-100 °C) Textured PEI Plate(90-100 °C)Engineering Plate(90-100 °C) High Temperature Plate(90-100 °C) Textured PEI Plate(90-100 °C)Engineering Plate(100-120 °C) High Temperature Plate(100-120 °C) Textured PEI Plate(100-120 °C)Cool Plate(30-35 °C) Engineering Plate(30-45 °C) High Temperature Plate(30-45 °C) Textured PEI Plate(30-45 °C)Cool Plate(45-65 °C) High Temperature Plate(45-65 °C) Textured PEI Plate(55-65 °C)Engineering Plate(60-80 °C) High Temperature Plate(60-80 °C) Textured PEI Plate(60-80 °C)Engineering Plate(70-100 °C) High Temperature Plate(70-100 °C) Textured PEI Plate(70-100 °C)Engineering Plate(100-120 °C) High Temperature Plate(100-120 °C) Textured PEI Plate(100-120 °C)Engineering Plate(100-120 °C) High Temperature Plate(100-120 °C) Textured PEI Plate(100-120 °C)Engineering Plate(100-120 °C) High Temperature Plate(100-120 °C) Textured PEI Plate(100-120 °C)
Adhesion Methods
Bambu Liquid Glue Glue StickBambu Liquid Glue Glue StickBambu Liquid Glue Glue StickBambu Liquid Glue Glue StickBambu Liquid Glue Glue StickGlue StickBambu Liquid Glue Glue StickBambu Liquid Glue Glue StickBambu Liquid Glue Glue StickGlue StickGlue StickGlue StickGlue Stick
Printer Settings
Print with Enclosure
Seal with Desiccant
Print Speed
< 300 mm/s< 200 mm/s< 300 mm/s< 180 mm/s< 300 mm/s< 300 mm/s< 200 mm/s< 250 mm/s< 200 mm/s< 100 mm/s< 100 mm/s< 100 mm/s< 130 mm/s
Nozzle Temperature
190 - 230 ℃240 - 270 ℃240 - 280 ℃240 - 280 ℃240 - 280 ℃260 - 290 ℃220 - 240 ℃210 - 240 ℃240 - 270 ℃260 - 300 ℃260 - 300 ℃260 - 300 ℃260 - 290 ℃
Part Cooling Fan
50 - 100%0 - 60%0 - 80%0 - 80%0 - 80%0 - 60%50 - 100%50 - 100%0 - 40%0 - 40%0 - 40%0 - 40%0 - 40%
Post-printing Processes
Annealing
50 - 60 ℃ 6 - 12 hoursN/A80 - 90 ℃ 6 - 12 hours80 - 90 ℃ 6 - 12 hours80 - 90 ℃ 6 - 12 hours85 - 100 ℃ 6 - 12 hoursN/A55 - 60 ℃ 6 - 12 hours65 - 70 ℃ 6 - 12 hours90 - 130 ℃ 6 - 12 hours90 - 130 ℃ 6 - 12 hours90 - 130 ℃, 6 - 12 hours90 - 130 ℃, 6 - 12 hours
Bambu Filament Guide
This filament guide offers a comprehensive comparison of properties, application, and printing requirements for Bambu filaments, aiming to help users select the best-suited material for needs. Compare up to 4 materials by ticking their checkboxes. For detailed technical information, download filament technical data sheets (TDS) on product pages.
This filament guide offers a comprehensive comparison of properties, application, and printing requirements for Bambu filaments, aiming to help users select the best-suited material for needs. For detailed technical information, download filament technical data sheets (TDS) on product pages.