See What You Can Do
With A1
4.5 hours
「Good Vibes Only LightBox」
1 day
「RC Santa Snowcat」
1.5 day
「Triple-axis Tourbillon」
5 hours
「Phone Rig Set - Cage/Filter ring/Handle」
Highlight Overview
AMS lite
Print Multi-Color
Full-Auto Calibration
No Manual Adjustment
Active Flow Rate Compensation
Smooth At Every Corner
High-Speed Precision
10000 mm/s² Acceleration
Print Silently
Silent Mode Under 48 dB
Reliability
Bambu Lab Quality You Can Trust
MakerWorld
Start Printing With A Single Click
Auto Filament Loading
Full-Auto Calibration
Auto Bed-Level
Auto Z-Offset
Auto Vibration Calibration
Auto Flow Dynamics
Auto Belt Tension
Auto Filament Loading
Full-Auto Calibration
Goodbye to Tedious Manual Calibration And Tuning
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Goodbye to Tedious Manual Calibration And Tuning
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
No More "Paper Method"
A1 probes the bed with the nozzle to measure the absolute Z-offset. No need to stick a paper as reference.
Auto Tune Both X & Y Resonance Before Every Print
A1 has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.
Fully Automated PA (Pressure Advanced) Calibration
First of its kind, A1 runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick & match involved, A1 handles Pressure Advanced calibration automatically.
Auto Monitoring And Adjusting The Belts
A1 can check the belt tension automatically through the vibration frequency calibration. If the belt tension is loose the HMS system will notify you to adjust the auto belt tensioner.
Load/Unload Filament With One Touch
No manual setting involved, A1 fully automated the filament load/unload process.
Swift Maintenance
Quick Swap Nozzles
All-new quick swap hotend design, the hotend pops in and out with just 1 clip.
AMS lite
Multi-Color Printing For Everyone
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Model created by @KOZA
AMS lite
Multi-Color Printing For Everyone
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Model created by @Sid Naique
AMS lite
Multi-Color Printing For Everyone
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Model created by @3_D_M_A
Active Flow Rate Compensation
Print Smooth At Every Corner, Always
The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
High-speed Precision
Bed Slinger with CoreXY Speed And Quality
Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Intuitive UI
As Easy As Your Smart Phone
A1 now has a simplified touchscreen UI system that walks you through all the hurdles. You don't have to be a 3D printing expert to use the A1.
Worry-free Printing
Start And Relax
Bambu Lab printers are well known for the worry-free printing experience that has been widely praised by our fantastic userbase. Check out what our users have to say about our printers on the market!
The A1 Mini is an exceptional printer, very quiet, very good print quality. I have just printed the Bambu Lab Christmas Cabin on it, it took around 19 hours to print on 9 plates and 3 hours to glue it together, but it is very nice. Even the very small items stick very well to the bed.
——Facebook User Group
Well finally finished a larger print! Printed most of this one with the A1 mini since the P1P was turning into a P1S. Lol. Turned out awesome! Printed at a 100% and it’s pretty big! Printed amazing! Now I need a good shelf to display it!
——Facebook User Group
MakerWorld
1-Click Away From Printing
Introducing MakerWorld, the next-gen 3D model platform with 1-click printing straight from the Bambu Handy App. In addition to this new platform, you can always use Bambu Studio and Bambu Handy App to manage your printers anytime, anywhere.
1
2
by @sid naique3
by @randomizy
Print Silently
Active Motor Noise Canceling
Active Motor Noise Canceling and Silent Mode can bring down the noise level to under 48 dB making A1 one of the quietest 3D printers on the market, so you can take a nap while your printer is working hard.
Reliability
All-Metal Frame, Bearings and Rails
We spent extra to bring you the most reliable All-metal rails and cover protected drive system. You get Bambu Lab performance out of the box, designed for consistency and longevity.
Privacy
Camera Lens Cover
Forget about the sticker, physically block the camera with a simple mechanism.
Privacy
Easy To Use Off The Internet
If you do not like the concept of Cloud printing, you can use LAN mode for remote control / live view and send jobs to your A1 without the need for cloud communication.
Comprehensive Filament Monitoring
All-metal Rail System
Full-Auto Leveling
Active Vibration Compensation
Active Flow Rate Compensation
Active Motor Noise Canceling
RFID Sync
Real-time Monitoring
Optional AMS Top Mount
One More Thing
For those who want to install their AMS lite unit on top of their A1 printer, we offer the top mount bracket set. This set of printable components allows you to safely mount your AMS lite on top of the A1.
Product
Community
Support
Software
Company
Partners
Copyright © 2024 Bambu Lab All Rights Reserved.